Treatment Solutions

HOW TO CHOOSE INTENSITY AND FREQUENCY?

There is no recommendation of which setting to use. Because the size, color, and depth of spots, moles, and tattoos are different for every patient.
The selection of settings are flexible and adjusted according to the skill level of the operator and the size of the treatment area.
Those who are skilled in laser removal like to use the high energy setting, because the laser is faster and more powerful and easy to operate.
For those who are not proficient in laser removal, it is recommend to start from the mid-level. If the energy is low, then adjust to the high energy setting. If the energy is high, adjust to the low energy setting. The frequency and intensity should be selected to the specific reaction of the skin.
For the new operator .Settings should be set at the slowest Frequency of 9, and the weakest Intensity of 1 bar, and can then be adjusted as needed.

 

WHAT IS THE BEST DISTANCE BETWEEN THE MACHINE AND THE SKIN?

The laser head should be at least 1 to 2 mm away from the skin, or lightly touching the skin surface.
The laser does not work if it is too far away from the skin surface.
The red laser is almost invisible, but it does work.
 

HOW TO REMOVE SPOTS?

Freckles, genetic spots, pigment spots, age spots, flaky spots and other external spots can all be removed by the NEATCELL pen at one time. Point the machine at the desired spot and laser the spot until it turns red or yellow. There is no need to wipe off the spot. As long as the spot is reddened or yellowed, the spot will fall off with the scab in the next few days.
In addition, it is not recommended that using the NEATCELL picosecond pen to remove dermal spots that grow on the cheeks. Because it is easy for the pigment to come back. Dermal spots, chloasma, large areas of pigmentation, or a dark yellow face, etc. Whitening and skin care products can be used.
 

HOW TO REMOVE EYEBROW MARK AND TATTOOS?

The removal of tattoos and eyebrow marks requires multiple sessions.
Generally, 5 to 8 sessions of treatment are required, or even more. Remove once a month as a session of treatment.
When the laser breaks the pigment, the epidermis becomes grayish yellow or the epidermis has a layer of hard scab. Stop removing it immediately.
During the removal process, there is no need to wipe off the pigment.
Remove once a month, removing a very shallow layer each time. Only by removing them in many sessions, can the effect of removing tattoos and eyebrow marks be achieved .
If the pigment area is very large, the treatment should be divided into multiple sessions, and must not be completed at one time to avoid bacterial infection. Other wise the consequences would be disastrous. The removal of tattoos on scar tissue is not recommended. Picosecond laser is prohibited to remove eyeliner. DO NOT POINT AT THE EYES.
 

HOW TO GET RID OF MOLES?

All kinds of pigmented moles can be removed.
Moles can be wiped with a cotton swab moistened with saline or alcohol during removal. By doing this, the removal effect is better and faster.
The best removal effect is when there is no melanin.
In addition, pay attention to determine the depth of the mole.
Some moles grow on the surface of the skin. The roots of some moles reach the subcutaneous tissue, and these moles need to be removed several times.
 

HOW TO GET RID OF LIGHT ACNE MARKS AND LIGHT PIGMENT MARKS?

For light acne marks and light pigment marks, it is recommended to treat them with whitening and spot-lightening skin care products. 
 

TREATMENTS OF OTHER AFFECTED PARTS

The picosecond laser only reacts strongly to the pigmented areas.
For light-colored affected areas, such as light-colored spots or light-pigmented marks, light- colored tattoos. Particles without melanin, corns, warts, etc., you can use eyebrow pencils to blacken them and remove them.
In this way, the power and usefulness of the picosecond laser can be maximized.
 

TIPS

Too little removal power or removal of eyebrow marks and tattoos may cause blisters.Don't worry, there will be no impact.The main substances of blister fluid are electrolytes, glucose, fibrin, etc.Blister skin is a good protective film, it is best to let it absorb on its own.Large blisters can be pierced with sterilized acne needles and the blisters can be drained out, and then coated with iodophor for disinfection.Do not touch the blisters with your hands to avoid infection.
 

HOW TO CARE FOR THE AFFECTED AREA AFTER LASER REMOVAL?

Washing your face and bathing:
After pigment removal by the NEATCELL picosecond laser, before washing your face and taking
a bath, you need to do the following treatments to prevent skin infections:
For small moles, spots, and warts, cover them with waterproof band-aids, and then remove the band-aids after washing your face or bathing.
Large area tattoos can be covered with PU medical waterproof stickers, and then remove the stickers after washing.
For spots that waterproof band-aids are too small . Use a warm towel to gently rub the face on the first and second days after removal. On the third day, you can wash your face with clean water. After washing, gently touch your skin with a dry towel to quickly dry your face.
After the scabs fall off, you can wash your face casually with facial cleanser.
How to care:
Do not drink alcohol until the scab has fallen off. If the affected area is large, it can accidentally cause infection. Apply the iodophor purchased at the pharmacy to the affected area or take anti- inflammatory drugs as directed by the doctor. In addition, let the scab fall off naturally, don't pick it off with your hands.
The red mark after the scab will fall off:
After the scab falls off, there will usually be red marks. Don't worry, this is a normal phenomenon of skin growth. The mark is the color of the new skin.
Generally speaking, it will disappear on its own. If you want it to disappear faster, you can choose a massage method. Take a small amount of vitamin E or aloe vera gel and apply it to the red mark. Use your finger to gently massage the red mark. Twice a day, 5 minutes each time, will speed up the disappearance of the red mark.
 

HOW TO BECOME A MASTER OF LASER REMOVAL AFTER TWO DAYS OF PRACTICE?

Newbies will have various problems and worries after receiving the laser picosecond pen. This is normal because you have not operated it before. It is recommended to find something with color to practice removing, for example, draw dots on a piece fruit with a black pen, and then use a laser to remove the dots.
After practicing proficiency, first remove the mole from the arm or body, and finally remove the mole on the face. This must be done step by step. Only by doing this can we build self- confidence.